New Malifaux templates/Tokens

[Wulfen]

Ok, posting a link to my templates/tokens; Guild is the only one done so far, but these really didn't take too long, so I hope to have the rest done soon. It's in doc format, but I can host PDF as well, I just didn't like how it was converting them.

http://www.filefront.com/14467663/Malifaux%20Guild%20Tokens.docx

Let me know what you guys think, they were pretty hastily done in spots, but they work for now. The tokens should print with no scaling and go right onto 30mm bases. I did the flame templates as standalone, so if you want to put them on bases, they'll need to be resized.

[streetsamurai]

great stuff

[Nathan Caroland]

Fun stuff.

[DangerousBeans]

doesn't work :(

[Wulfen]

doesn't work :(

What do you mean it doesn't work? It's just a Word doc. If you don't have MS Office, you can try OpenOffice, or just hang tight until I can get a PDF uploaded, probably later tonight.

[DangerousBeans]

Sorry, that came out wrong. When I tried to open an error came up, probably just my crappy computer.

[capcap]

Thanks, I got it to work. I would suggest PDF as it is more universal compared to word. Look forward to seeing more of these in the future. I would like to request Neverborn, Arcanists and Outcasts.

[Larkin Vain]

Well done. Thank you.

[Wulfen]

Quick update, I have most of the stuff done, I wanted to go ahead and post what I had. I still need to get all of Arcanists, Outcasts, and some Neverborn done; and I haven't done counters for models unreleased (with the exception, I think, of Canines), but I wanted to post this in case anyone wanted to use what I had already available.

http://www.filefront.com/14495451/Malifaux%20WIP%20Tokens.docx

Lots of body and corpse tokens in there, and I'll try to finish the rest of it within a week or two, plus generic tokens for DF, CB, WP and other adjustments. I'm also still meaning to convert it to PDF for ease of use.

[Draykin]

Im gonna have to wait for the PDF cause I dont have the software to read these.

[WEiRD sKeTCH]

Wulfen, since you're using Office 2007, try saving the file as a .doc file rather than a .docx file.

That'll let it be more universally able to be opened. :)

[MEdwards]

Chris, I've converted this to a PDF and it can be downloaded here: http://www.geocities.com/sparknutz17/Malifaux_WIP_Tokens.pdf

[Shinobi]

Very nice!! I did some counters for my own crews last night, but used WWG textures for the graphics. Mounted them on artboard, wasn't fun cutting out all them circles!!

[jmp_mydog]

Probably won't help you now but a compas cutter is less than $5 at micheal's you'll love it.

[Draykin]

I just got an "Ek success" 1" punch last weekend! They make great tokens. It just takes some doing to get the artwork.

[capcap]

These tokens are great. Thanks for the good graphics. Can't wait to try these on the table.

[Khail]

Been using these for my Resurrectionists - nice work! Only thing not on the sheet that I seem to always want a token for is Defensive Stance.

[Wulfen]

Just got back from a work trip to Tampa, so I should hopefully have all of them done in the next few days, including generics like +/- to CB, DF, stuff like that. Thanks for taking a look!

[TheBugKing]

Just got back from a work trip to Tampa, so I should hopefully have all of them done in the next few days, including generics like +/- to CB, DF, stuff like that. Thanks for taking a look!

You have to mention stuff like this!

There is a group in Tampa as well as a few folks in Orlando! (Would have been fun to play. Not that I had the time unfortunately. :( )

And on that note, I am in Wetherford Oklahoma till Thursday morning. Going to be busy as hell though.

Keep up the work on the tokens. They look good!

[Sushicaddy]

I plan to get some large glass beads (like glass tokens but wider, some are around 1" in diameter, but are flat) and glue these to the underside of them. Great work!

[Wulfen]

Quick update here, sorry for the delay, between work and an untimely video card issue, I've been late getting these ready.

I'm on the final stretch now, just some Neverborn and Outcasts left, and I'll post the full set.

[n0signal]

Good stuff man, I'm looking forward to all of these, great work!! :D

[karn987]

I cant get the file from file front, says it's not there :disappoin

[Peoples Champ]

I cant get the file from file front, says it's not there :disappoin

Same problem any help gratefully recieved.

[mriverakc]

all the sites tell me the same thing that the file is not available.

[Wulfen]

Here is the new doc...not all done yet, but wanted to get something out there for you guys until I've finished.

http://www.filefront.com/14961927/Malifaux%20WIP%20Tokens.doc

[n0signal]

Downloaded fine. They're looking great as ever! I can't use any of them yet (I play Zoraida and Som'er Jones) but I look forward to future updates. ;)

[nebiros]

Not to push you or anything :) but the tokens you are missing for the Neverborn (aside from Zoraida's) are poison tokens for Candy. Thanks for the great work. I tried to make my own and they didn't come out nearly as impressive as yours. I look forward to seeing the finished product.

[thewartoad]

They look fantastic! Can't wait until I get some photo card to print them on! Great Job!

[Cenotaph]

These are stunning. Couldn't wait to get them made up on bases. Luckily I had just enough spare.

Keep up the great work :star:

[n0signal]

Are they designed to print at 100% and fit into 30mm bases then?

[Masters of Ulthwe]

Brilliant job, thankyou. I'm printing off a set now. :five:

[Wulfen]

Are they designed to print at 100% and fit into 30mm bases then?

Yep, just print them with no scaling.

[newsun]

I have included the PDF version here (you can always download cutePDF printer driver to create them yourself).

http://newsun.org/mailfaux/Malifaux%20WIP%20Tokens.pdf

[Wulfen]

Thanks newsun, I had converted them, but they looked a bit 'off' to me, so I just released them in doc format. Appreciate the assist!

I should have the rest done soon, although I'm not doing anything really with models unreleased, except for totems. Maybe I should go ahead and get those too, I wasn't worried about it since I don't proxy...

[n0signal]

These tokens are great man, I really like the style you've done them in; not to rush you, but... Zoraida and "Teef" are feeling neglected. *exposes old-lady breasts as an incentive* ;)

[draego]

Sorry dude aint available for download again :(

[newsun]

NP, if you send me a PM when you update the file, I can get the PDF up and hosted.